Dee Zee DZ3530 - Manual (Page 8)

Slide the pre-assembled end cap into the end of the board [A] until the end cap is flush with the
end of the board. The end cap must be inside the board and the strap bracket outside the board.
Tighten the bolts with a 7/16" wrench and socket.
Before attaching the second end cap, slide three of the strap bracket [F] into the running board.
For regular cab trucks, slide two of the strap bracket [F] into the running board.
7
Attach the other end cap.
DZ 3527 6 of 8 12/11/2012