Dee Zee DZ1532 User Manual
Page 8
Place the running board on the angle braces. Adjust the angle braces as needed to insure that
holes can be drilled through the bottom of the board to attach it to the braces.
ADJUST BRACE AS NEEDED
9
Do not remove the clamps holding the frame bracket [F] to the frame.
Once the angle braces are in the correct location, tighten the angle brace to the rocker panel brackets
and the frame brackets using a 7/16" socket and wrench.
Then drill 3/16" holes in the frame through the holes in the frame bracket
Repeat this step for each bracket location.
10
DZ 1532
6 OF 8
7/28/2011
See also other documents in the category Dee Zee For the car:
- DZ370183 (4 pages)
- DZ370203 (3 pages)
- DZ370233 (2 pages)
- DZ370313 (3 pages)
- DZ370353 (5 pages)
- DZ370393 (4 pages)
- DZ370693 (3 pages)
- DZ371033 (4 pages)
- DZ371193 (2 pages)
- DZ371213 (4 pages)
- DZ371233 (3 pages)
- DZ371243 (3 pages)
- DZ371253 (3 pages)
- DZ371263 (4 pages)
- DZ371293 (2 pages)
- DZ372663 (4 pages)
- DZ372833 (6 pages)
- DZ371273 (2 pages)
- DZ370113 (4 pages)
- DZ370303 (4 pages)
- DZ370503 (6 pages)
- DZ370583 (4 pages)
- DZ370593 (4 pages)
- DZ370643 (4 pages)
- DZ370783 (6 pages)
- DZ371513 (5 pages)
- DZ371523 (6 pages)
- DZ371533 (4 pages)
- DZ371643 (4 pages)
- DZ371953 (3 pages)
- DZ372213 (4 pages)
- DZ372233 (4 pages)
- DZ372243 (5 pages)
- DZ372253 (4 pages)
- DZ372293 (2 pages)
- DZ372333 (5 pages)
- DZ372693 (5 pages)
- DZ371823 (4 pages)
- DZ370403 (4 pages)
- DZ370343 (4 pages)
- DZ372513 (3 pages)
- DZ372523 (4 pages)
- DZ372533 (4 pages)
- DZ370793 (5 pages)
- DZ370211 (3 pages)