Dee Zee DZ1532 - Manual (Page 6)

Attach the rocker brackets [E] to the rocker panel with a ribneck carriage bolt [K],
washer [H], and nut [I].
The top portion of the bracket should be inside the rocker panel.
5
Once the rocker panel brackets are installed, attach the angle braces to the bottom of the brackets
through the long slot in the angle brace using a hex head bolt [G], two washers [H], and a nut [I].
Do not completely tighten at this time.
6
DZ 1532 4 OF 8 7/28/2011