Dee Zee DZ1032 - Manual (Page 11)

Pressing the flap up against the wheel well, drill a 1/4" holes through the hole in the mud flap
into the sheet metal of the wheel well. The front tire may need to be turned to allow room to drill.
15
Attach the flap the inner wheel well using a hex head bolt [G], washer [H],
and nut [I] using a 7/16" socket/wrench.
Check all hardware to make sure it has been tightened.
Repeat the assembly steps for the other side of the vehicle.
16
DZ 1032 9 OF 9 7/28/2011