Dee Zee DZ16252 - Manual (Page 8)

Page 8 of 8
DZ 16252 04/15/09
Place running board (A) onto the brackets. Align 8mm square head bolts (H) in the bottom of
the running board (A) with holes in the brackets. Completely tighten brackets to vehicle.
Center board on vehicle between wheel well openings or until desired appearance is aquired.
Adjust board in/out on vehicle until desired appearance is met. Secure board into palce using
8mm hex nuts (L).
Repeat steps 1-5 for passenger side using brackets (E) and (G).
5
L
H
A
6
13 mm