Anthem BLX 200 - Manual (Page 9)

9
E
N
G
L
IS
H
• You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-LIVE compatible
discs.
• Connect the LAN connector of this unit to your internet source.
cONNEcTING TO NETWORK
■
Notes :
• After making a broadband internet connection, you should set the communication setting. (For details, refer to “SETTING THE
NETWORK” on page 35.)
• When using a broadband internet connection, a contract with an internet service provider is required. For more information,
contact your nearest internet service provider.
• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ
depending on your internet environment.
• Use a LAN cable/router supporting 10 BASE-T/100 BASE-TX.
• Some LAN cables are easily affected by noise.
We recommend using a shielded type cable.
LAN
Internet Modem PC Broadband router
This unit
• The multi-room system kit(sold separately) is essential for operation from a remote location .
For information on the multi-room system kit, contact the Xantech corporation at 1-800-843-5465 or www.xantech.com.
• IR IN jack allows you to control this unit from other room with the remote control unit.
• To control this unit from other room with the remote control unit, connect the IR IN jack to the output of the connecting block.
■Note :
• Remote operation may become unreliable if the IR receiver is exposed to strong light such as direct sunlight or inverted
fluorescent.
cONNEcTING MULTI-ROOM SYSTEM KIT
This unit
Another room
IR IN
BLX-200(A)_091023:BLX-200(A) 2009-10-26 오 5:52 페이지 9