Anthem BLX 200 - Manual (Page 36)

E
N
G
L
IS
H
36
Continued
5.
Press the CURSOR UP/DOWN buttons to select
“Apply”, then press the OK button.
■When selecting the Manual or the Dynamic
• Then the network test is automatically performed and the
result is displayed.
• Press the OK button to confirm the test result. Then the
network menu will be displayed.
■When selecting the Off
• The values for IP Address, Subnet Mask, Gateway,
Primary DNS and Secondary DNS are all cleared.
• Then the network test is automatically performed and the
result is displayed.
• Press the OK button to confirm the test result. Then the
network menu will be displayed.
When selecting the Network Test
BLX-200(A)_091023:BLX-200(A) 2009-10-26 오 5:52 페이지 36