beautypg.com

Yetter Avenger 30 Coulter User Manual

Page 5

background image

5

ASSEMBLY INSTRUCTIONS



WARNING:

Never work under the toolbar while in a raised position without using safety lockups.



WARNING:

Use extreme caution, the blade is sharp and may cause bodily injury.

The 30” coulter that are mounted on 12” spacing will need to be completely assembled before mounting to
the toolbar.

NOTE: To aid the assembly of the opener, it is recommended that a stand be constructed to temporarily
attach the opener and hold it in an upright position.


CAUTION:

The coulter and its components are very heavy. Extra attention to lifting techniques while

handling and or maneuvering the coulter during assembly is very important. Failure to do so may lead
to personal injury or death.

STEP 1.
Attach the 2986-111 hub assembly and 2986-318 hub cap retainer to the 2986-106 main arm
assembly using (4) ½” x 1-1/2” hex head bolts. This step will determine right hand or left hand coulter
assembly.

RIGHT HAND ASSEMBLY