Yetter Avenger 30 Coulter - Manual (Page 13)

13
ASSEMBLY INSTRUCTIONS
STEP 15. Attach the 8” toolbar spacers 8000-200 to the rear of the toolbar using the 1” x 7” x 9” u-bolts,
lock washers and nuts provided. Do not over tighten the nuts as the spacers may have to be moved
slightly so not to interfere with the openers that are mounted to the rear toolbar frame.
NOTE: 12’ toolbar will need (6) 3600-123 – 8” Spacer Kits
16’ toolbar will need (8) 3600-123 – 8” Spacer Kits
21’ toolbar will need (10) 3600-123 – 8” Spacer Kits
COULTERS FROM PREVIOUS STEP NOT SHOWN FOR ASSEMBLY CLARITY
STEP 16. Attach the rear/second toolbar frame to the 8000-200 - 8” spacers using the remaining 1” x 7” x
9” u-bolts, lock washers and hex nuts provided.
NOTE: Do not over tighten the 1” hardware because the spacers may have to be moved slightly.