American Standard Williamsburg One-Piece Elongated Toilet 2038.700 - Manual

WILLIAMSBURG™ ELONGATED
ONE-PIECE TOILET
VITREOUS CHINA
WILLIAMSBURG™ ELONGATED ONE-PIECE
TOILET
2038.700
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• One-piece design
• Elongated siphon jet action bowl with
2” trapway
• Rim height at 381mm (15”)
• Design coordinated seat and cover included
• Chrome-plated side mounted trip lever with
white ceramic handle
• 2 bolt caps
• Internal trapway area fully glazed
• Part of Williamsburg series of design-matched
fixtures
Nominal Dimensions:
737 x 457 x 686mm
(29" x 18" x 27")
Fixture only, supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M (and 19.6M) for Vitreous
China Fixtures - includes Flush Performance,
Ball Pass Diameter, Trap Seal Depth and
all Dimensions
To Be Specified
Color: White
© 2001 American Standard Inc.
10/01
SPS 2038.700
470mm
(18-1/2)
C/L OF SEAT POST HOLES
(140mm CENTERS)
(5-1/2)
387mm
(15-1/4)
762mm
(30)
222mm
(8-3/4)
19mm 6mm
(3/4 1/4)
159mm
(6-1/4)
330mm
(13)
244mm
(9-5/8)
(5)
140mm
(5-1/2)
692mm
(27-1/4)
SUPPLY AS
REQUIRED
FINISHED
FLOOR
FINISHED WALL
*
127mm
*
13mm
(1/2)
83mm
(3-1/4)
305mm
(12)
457mm
(18)
445mm
(17-1/2)
C/L
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF 305MM (12")
FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED SEPARATELY.
* DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerance
established by ANSI Standard A112.19.2
These measurements are subject to change or cancellation. No responsibility is assumed for use
of superseded or voided pages.