Telenav for AT&T Supported Devices: v4.1 for AT&T 8125, 8525 Users Guide - Manual (Page 26)

© TELENAV 2003-6 PAGE 26 OF 32
Record Location
This menu option allows you to mark and label your current location for future
reference. If you choose
Record Location, there will be brief activity to
determine the GPS position, and then you will need to enter a label.
After the location is saved, you will be returned to the GPS Tools menu.
View Locations
This menu option allows you to view a map of the locations that you have
saved for future reference. Highlight the location that you wish to view and
select it, there will be brief activity to download the map.
Use the zoom bar on the right to zoom in and out of the map. The default
zoom level is set to 4, the zoom level ranges between 1 and 8. Use the
navigation keys to move the location cursor, moving the cursor off the map will
cause the map to pan to that location.
TIP: When viewing the map select the Menu key to look up the location
address or select the ‘drive to cursor’ option and begin a new trip to your
recorded location.