Telenav Scout v1.0 for Windows for T-Mobile User Manual

Page 28

 Delay – Total time delay caused by traffic conditions, or the sum of delays on each segment.

NOTE: Delay refers only to the route currently shown.

 MPH/KPH – Average speed on that road segment.

NOTE: This is not the distance from the origin but the length of each road segment.

 Street – The street or highway name of the road segment.

 Dist – Distance until next turn.

NOTE: “N/A” is displayed for segments without traffic flow information (usually local streets) or segments farther
than 200 miles away.

If you select an incident line, you can view the details. Below is an explanation of
what you will see on the Traffic Detail screen:

 Delay – The additional time it will take to travel the segment as

compared with the time it would take if traveling at the posted speed.

 Travel Time – Estimated time it will take to travel the segment.

 Slowest Speed – Slowest speed observed on the segment.

 Average Speed Bar – Average speed of a segment on a scale of 0

to the maximum-posted speed for that segment.

 Incident Detail – Each incident is displayed with the following:

-Incident icon color-coded by severity

-Location

-Additional comments

NOTE: If there is no flow information for a segment, the Average Speed bar on
the Details page is grayed out.

PAGE 28 OF 74