Sper Scientific 840063 Vibration Meter - Manual (Page 8)

- 8 - Rev. 2/15/06
SPECIFICATIONS (continued)
Frequency 10 Hz~ 1 KHz, sensitivity relative during the frequency
range meets ISO 2954 (see pg 6).
Weight Meter with battery: 10 oz (230 g).
Probe with magnetic base: 2 oz (50 g).
Dimension Meter: 17" Ч 3" Ч 1 ½" (80 Ч 75 Ч 35 mm)
Probe cord: 49" (125 cm), probe diameter: (19 mm)
Display 61 mm x 34 mm super large LCD display.
15 mm (0.6") digit size.
Calibration
Point
Velocity: 50 mm/s (160 Hz)
Acceleration: 50 m/s
2 (160 Hz)
Sampling
time
Approx. 1 second.
Operating
conditions
Temperature: 0 ~ 50°C (32 ~ 122°F)
Humidity: Less than 80% R.H.
Power
supply
Alkaline or heavy duty type DC 9V battery.
Power
consumption
Approx. DC 6 mA.
Circuit Exclusive microcomputer circuit.
V. WARRANTY
Sper Scientific warrants this product against defects in materials and
workmanship for a period of five (5) years from the date of purchase, and
agrees to repair or replace any defective unit without charge. If your
model has since been discontinued, an equivalent Sper Scientific product
will be substituted if available. This warranty does not cover probes, bat-
teries, or damage resulting from accident, misuse, or abuse of the prod-
uct. In order to obtain warranty service, simply ship the unit postage pre-
paid to:
SPER SCIENTIFIC. 7720 East Redfield, Suite 7 Scottsdale, AZ 85260
(480) 948-4448, [email protected], www.sperscientific.com.
The defective unit must be accompanied by a description of the problem
and your return address. Register your product online or return your
warranty card within 10 days of purchase.