beautypg.com

Sper Scientific 850071 Environmental Quality Meter User Manual

Page 23

background image

23

Note…

To enable/disable the touch-tone feature, see page 12.

Manual Datalogging

1. Set the sampling time to 0 seconds (see page 13).
2. Press

REC. “REC” will appear on the LCD.

3. Press

LOGGER. “REC” will flash on the LCD. The

tone will sound as the measurement data and time

information are saved to memory. The position

(location) number will appear on the bottom of the

LCD and will also be recorded on the SD card.

4. To change the position number, press ▼.

The position number will flash on the LCD.

5. Press ▲or ▼ to set the position number

(from 1 to 99).

6. To indicate the position location, P x (x= 1 to 99)

will appear on the LCD.

7. Select the position number and press

ENTER

to confirm.

8. To finish datalogging, press REC for ≥ 2 seconds.

“REC” will disappear from the LCD to indicate that

datalogging has ended.

Note…

To enable/disable the touch-tone feature, see page 12.