Sper Scientific 850071 Environmental Quality Meter - Manual (Page 18)

18
4. “K” or “J” appears on the LCD to indicate the type of
thermometer.
Notes…
When using the meter for the first time, the meter
will default to K type thermocouple. See page 13 for
instructions on selecting the thermocouple type.
To change the temperature unit, see page 13.
Light Meter
1. Press POWER to turn the meter on.
2. Press and hold FUNC to cycle through the options
until “LIgHt” appears on the LCD. Release the
FUNC button.
3. Plug the probe plug into the probe input socket.
4. While holding the sensor handle, point the light
sensor directly toward (facing) the light source.
The light measurement will appear on the LCD.
Note…
This meter measures light in LUX or Foot Candles (Ft-cd).
To change the light unit, press and hold REC ENTER.
Release REC ENTER when the desired unit appears on
the LCD.