Sper Scientific 850071 Environmental Quality Meter - Manual (Page 11)

11
Entering Setup Mode
1. Press POWER to turn the meter on.
2. Press and hold SET for at least 2 seconds to enter
Setup Mode.
3. Press NEXT to cycle through the setup functions.
Note…
Press ESC to exit Setup Mode. The meter will return to
Normal Mode.
Real Time Clock
1. Enter the clock function from Setup Mode
(see above). “dAtE” appears on the LCD.
2. Press ENTER. The year will appear on the LCD.
3. Press ▲or ▼ to adjust the value. Press ENTER to
save the value.
4. Repeat Step 3 to adjust the month, date, hour,
minute, and second.
Note…
This procedure adjusts the meter’s internal clock. The
internal clock will function when the meter is turned off as
long as the batteries have adequate power.