Sper Scientific 850046K AquaShock DO Kit - Manual (Page 16)

17
Set Salinity Compensation
1. Press RANGE to select mg/L (ppm) measurement scale.
2. Press SETUP to enter the Setup Mode.
3. Press ↑ or ↓ to display the Set Salinity screen (see Fig. A)
4. Press SETUP to enter the Set SAL. Value screen (see Fig. B).
5. Press ↑ to increase the SAL. Value.
Hold down ↑ to continually increase the value.
Press ↓ to reduce the SAL. Value.
Hold down ↓ to continually reduce the value.
Salinity compensation value range is 0.0~50.0 ppt.
6. Press SETUP to save the value and return to Normal Mode.
7. Press EXIT to return to Normal Mode without saving the change.
Fig. A Fig. B
Set Oxygen Content (mg/L (ppm)) Unit of Measure
1. Press RANGE to select mg/L (ppm).
2. Press SETUP to enter the Setup Mode.
3. Press ↑ or ↓ to display the Select Unit screen (see Fig. A).
4. Press SETUP to enter the Select Unit screen (see Fig. B).
5. Press ↑ or ↓ to select either mg/L or ppm scale.
6. Press SETUP to save the change and return to Normal Mode.
7. Press EXIT to return to Normal Mode without saving the change.
Fig. A Fig. B