Speedtech A Body Rear Coilover - Manual (Page 9)

9 | P a g e
Upper Bracket Installation
1964-65 Cars
6a. Using 5/16
” bolts, washers and nuts, bolt the upper bracket into place
through the original upper shock mount holes. Using the 5/16” holes in the
Speedtech bracket as a guide, drill two
5/16” holes in the frame. Bolt down the
bracket
using the 5/16” bolts, washers, and nuts. DO NOT skip this step, as all 4
bolts are necessary to keep the bracket securely mounted. See diagram below.
7a. Install your shocks. Be sure the 1/2” inside diameter bolt sleeve is located in
the top and the 5/8” inside diameter bolt sleeve is located in the bottom of the
shock.