Speedtech A Body Rear Coilover User Manual
Page 7
7 |
P a g e
Lower Brackets for Currie Rear Axles
4a. Line up the Speedtech lower bracket with the Currie axle bracket using the
lower trailing arm bolt. Using the Speedtech bracket as a guide, carefully mark
the axle bracket where the two upper ½” holes need to be drilled. Note- in most
cases it is a tight fit, take care to get bolts as squared as possible. After drilling
the holes bolt the Speedtech bracket to the axle bracket using the (2) ½ x 1.25”
bolts, washers and nuts. In some cases the brakes and axles may need to be
removed to do this. After the bracket is bolted in place, bolt in the lower trailing
arm.