Speedtech A Body Rear Coilover - Manual (Page 5)

5 | P a g e
The vehicle should be on a level surface before you start.
1. In a couple short hours you can update your Chevelle with your new
Speedtech Performance coilover brackets and shocks. We recommend you
inspect all of your car's suspension prior to installation of our parts, such as
bushings and trailing arms which may be worn and could cause adverse effects.
Replace parts as necessary. Now is also a great time to upgrade to our Articulink
rear trailing arms and adjustable rear sway bar.
2. Jack up and properly support the vehicle's frame on sturdy jack stands.
Remove the rear wheels if needed for extra room to work. With the rear axle
supported, remove one
side’s shock and the rearward part of the lower control
arm. Carefully lower the rear axle to the point that you can remove the coil
springs. Note: doing one side at a time keeps the rear axle stable in position.
Lower bracket for factory style axle brackets is the same for all years,
'64-72.