Speedtech A Body Rear Coilover - Manual (Page 13)

13 | P a g e
7. Once all parts are installed in position, double check to see that all bolts
are tight. Repeat this process for the other side.
9. With the weight off the rear suspension, support the rear axle and set the initial
ride height according to shock manufacturer instructions. Replace wheels and
tires and carefully lower the vehicle back onto the ground. Now you can fine tune
your ride height adjustments.
Because you have used factory mounting points as a base for this kit a wheel
alignment may not be necessary. If you have installed adjustable trailing arms
and/or changed front suspension components at the same time we do
recommend having an alignment performed by a reputable source familiar with
performance based alignments on older vehicles. On the following page you will
find baseline specs for a performance Pro Touring type alignment. We do not
recommend using alignment shop preprogrammed alignment specs for a
performance handling vehicle.