SIGMA PC 10.11 - Manual (Page 12)

40 www.sigmasport.com
5 SETTING MODE
5.1 ACTIvATING ThE SETTING MODE
Prerequisite: Your heart rate monitor must be in
training mode (see section 4.5 ‘Overview of modes
and functions’).
Hold down the TOGGLE (+) button. The display will
flash twice to indicate that the setting mode is now
active.
5.2 DISPLAY SETUP
5.3 BUTTON ASSIGNMENT IN ThE SETTING MODE
1st line SET indicates that the setting mode
is active.
3rd line/ Submenu or the setting to be
4th line changed.
START/STOP
Press:
Select and
confirm
Press and hold:
No function
TOGGLE
Press:
Reduce values
Press and hold:
Quickly reduce values
TOGGLE
Press:
Increase values
Press and hold:
Quickly increase
values/Exit setting
mode