SIGMA ROX 6.0 CAD - Manual (Page 24)

ROX 6.0
www.sigmasport.com roX 6.0 Page 24
setting the total hiking altitude
basic settings
4.19 Setting the total hiking altitude
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the
Mode 1
button to move to the total hiking altitude.
2 Press the Set button. The first digit for entry flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the Set button to save your setting.
“set oK” appears on the display.
4.20 Setting the total calories for bike 1 or bike 2
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the
Mode 1
button to switch to the total calories for bike 1 or bike 2.
2 Press the
Set
button. The first digit for entry flashes.
3 Press Mode 2 or Reset to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the
Set
button to save your setting.
“set oK” appears on the display.
Important Note:
06.537 kcal is equivalent to 6,537 calories.
4.21 Setting the total hiking calories
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the
Mode 1
button to switch to the total hiking calories.
2 Press the Set button. The first digit for entry flashes.
3 Press
Mode 2
or
Reset
to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the Set button to save your setting.
“set oK” appears on the display.
Mode 2 Reset
Mode 1 Set
Mode 2 Reset
Mode 1 Set
Mode 2 Reset
Mode 1 Set