SIGMA ROX 6.0 CAD - Manual (Page 23)

ROX 6.0
www.sigmasport.com roX 6.0 Page 23
setting the total hiking time
basic settings
6 Press Mode 2 or Reset to increase or decrease the minutes value respectively.
7 Press the
Set
button to save your setting.
“set oK” appears on the display.
Important Note:
0.005 h is equivalent to 5 hours.
4.17 Setting the total hiking time
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the
Mode 1
button to move to the total hiking time.
2 Press the
Set
button. The first digit for entering the hours value flashes.
3 Press Mode 2 or Reset to increase or decrease the hours value respectively.
Press the
Mode 1
button to switch to the next digit. Press the
Set
button to
save your setting.
4 Press
Mode 2
or
Reset
to increase or decrease the minutes value respectively.
5 Press the Set button to save your setting.
“set oK” appears on the display.
4.18 Setting the total altitude for bike 1 or bike 2
you can use this option to enter existing values (e.g. transferred from your old
device). new values are then added to these.
1 Press the
Mode 1
button to switch to the altitude for bike 1 or bike 2.
2 Press the
Set
button. The first digit for entry flashes.
3 Press Mode 2 or Reset to increase or decrease the value respectively.
4 Press the
Mode 1
button to switch to the next digit.
5 Press the
Set
button to save your setting.
“set oK” appears on the display.
Important Note:
01.779 ft is equivalent to 1,779 ft (The display will show 1.779 ft).
Mode 2 Reset
Mode 1 Set
Mode 2 Reset
Mode 1 Set