Acroprint ES900 - Manual (Page 44)

44
42 42
1
Press the [SELECT] button, at that
moment "9999" is displayed and the
first two digits flash.
(The flashing means it can be changed.)
Set the first two digits.
In the example, press the [CHANGE]
button to set at "12". And then press
the [SET] button.
At that moment, the flashing changes
to the last two digits.
2
Set the last two digits.
In case of the example, press the
[CHANGE] button to set at "34". Then
press the [SET] button.
At that moment, the " " mark indicates
the "TIME".
3
Select desired setting mode by
pressing the [SELECT] button.
Then make any changes to settings as
explained.
Once the password is set, you are required to enter the current password before
changing any settings.
"9999" will be displayed when you press the [SELECT] button.
How to change settings when the Password is set
SELECT CHANGE SET
SELECT CHANGE SET
SELECT CHANGE SET
SELECT CHANGE SET
TIME