Acroprint ES900 - Manual (Page 40)

40
36 38
Confirming the Time Table Program settings
To confirm the programs that have been set, press the [SELECT] button and position the " "
over the "Time Table Program" mark. At that moment, the "Program No." flashes. And then
press the [CHANGE] button.
After you finish confirming the program, press the [SET] button 6 times.
Now the time table program setting has been completed. Replace the cover and lock.
Important: If you do not complete confirming the settings, the time recorder will not print.
Deleting the Time Table Program settings
1
To delete a program, make the
"Program No." flash, and press the
[CHANGE] button until the desired
program No. is displayed.
2
Press the [CHANGE] button to set at
" ".
3
Press the [SET] button. At that
moment, the display changes to the
following figure.
4
After you finish deleting a program,
press the [SET] button once again.
Now the time table program setting
has been completed. Replace the cover
and lock.
Important: Printing will not occur
unless Step 4 is completed.
Press the [SET] button. At that
moment, the display changes to the
following figure.
BUZZ EXT.
SIGNAL
*OFF *ON
MO TU WE TH FR SA SU
MO TU WE TH FR SA SU
SELECT CHANGE SET
TIME TABLE
PROGRAM
SELECT CHANGE SET
TIME TABLE
PROGRAM
SELECT CHANGE SET
TIME TABLE
PROGRAM
SELECT CHANGE SET
TIME TABLE
PROGRAM
Example: Deleting the "Program No. 2".