Equus 3340 - Automotive DMM (10 MegOhm / UL) User Manual

Page 19

•

For fuse replacement:
Remove the three screws (you must remove the meter
stand to remove the third screw) on the back of the
meter and separate the case. Remove the fuse from the
fuse holder and replace with a 0.500A/250V - UL Listed
Bussmann, GMA Type (Radio Shack GMA/270
Series: #270-1047) fuse.

NOTE: Use a 0.500A/250V, 5x20mm type fuse ONLY -

Bussmann, GMA Type (Radio Shack #270-1047 or similar).
Using an incorrect fuse may result in serious injury and/or damage
to the unit.

Reassemble the cover/case and secure with the screws.

MAINTENANCE

No periodic maintenance is required other than the replace-
ment of the battery, the fuse, and visual inspection of the
meter.

Keep the tester clean and dry. DO NOT use solvent to clean,
use a damp (not wet) cloth and fully dry after cleaning.

The only replaceable parts are the 1.5 AA batteries,
0.500A/250V fuse (see page 17 for battery and fuse
replacement) and the Test Leads (for Test Leads call serv-
ice department).