EOTech 553 - Manual (Page 34)

5. If the manufacturing date located on the bottom of the sight is more than two years old, a
fee will be assessed for repair to include the cost of both parts and labor. A purchase order will
be required to process the repair. Please contact L-3 EOTech for an estimate.
Please send the unit postage prepaid, to address listed in Appendix B. Please include your
name, address, telephone number, and a written description of the problem you are
encountering, and also include the RA #. Whenever possible, ship the sight in its original box.
2.5 Installation of Equipment
MOUNTING
The Reflex Sight is equipped with mounting hardware to attach to a MIL-STD-1913 Picatinny
style rail. To achieve the best results and accuracy, the HWS must be mounted properly. The
Picatinny rail needs to be as parallel as possible to the bore to permit the maximum elevation
and windage adjustments. If it is required, it is strongly recommend that the Picatinny rail be
installed by a qualified gunsmith. To mount the sight, please follow these steps.
26