EOTech 553 User Manual

Page 25

Text mode
Original mode

3. TOGGLE

/ Between Normal and Night Vision Modes

To toggle between NORMAL and NIGHT VISION MODES, press the NV button. When
switching between modes, the sight will remember the last brightness setting. NOTE 3: When
used with a Night Vision device, always check to make sure the sight is not turned on before
pressing the NV button to turn on the sight in the Night Vision mode. Otherwise, it will toggle to
the Normal mode and saturates the image intensifier.

2.1.6

Windage and Elevation Adjustments

Fig 5: Adjustments