Boonton PIM 21 User Manual - Manual (Page 31)

31 Boonton
2.3 Manual start from USB Flash Drive
Some computers have the auto start capability disabled so the “Boonton Software” popup
dialog box (Figure 1 - Boonton Software) doesn’t appear. If this is the case, open an Explorer
window and locate the Wireless Telecom Group removable flash drives root directory. Double
click on the ‘setup.exe’ file and continue the installation from: USB Flash Drive.
2.4 FTP Download
The Passive Inter-Modulation Tester Data Acquisition software is available for FTP transfer at:
ftp://pimware:[email protected]/Data/pimware
Right click on the folder named: PIMT_Data_Acq_x.y (where x.y is the version) and save the
contents of this folder to a USB flash drive or a temporary directory on your computers disk
drive. Follow the instructions: USB Flash Drive