Boonton PIM 21 User Manual - Manual (Page 30)

30 | PIM 21 User’s Manual
Addendum - Data Acquisition Software
2.2 Installing the prerequisite Add-In
1) If the Add-In dialog box appears (Figure 3 - PIMT Data Acq.), click ‘Yes’ to install the re-
quired Add-In.
2) Click to accept the license terms and press ‘Continue’ (Figure 9 – EULA)
Figure 8 - EULA
3) When the installation completes, click ‘OK’
Figure 9 - Add-In Installation complete
4) At this point, only the Add-In has been installed. Remove the USB flash drive and proceed
with installation from: USB Flash Drive