Closing the computer – Apple Mac G4 (Optical Drive Replacement) User Manual
Page 9

Power Mac G4 Optical Drive -
9
3.
Connect the cables to the optical drive(s).
4.
Slide the rear panel back onto the carrier, making sure the top lip of the panel engages
with the top edge of the drive carrier.
Warning:
Be careful not to pinch the power cable between the panel and the carrier.
5.
When sliding the carrier back onto the optical drive shelf, make sure the latch on the
underside of the carrier engages with the notch in the drive shelf.
(Figure 13)
Figure 13
Closing the Computer
1.
Raise the side access panel, lift the latch, and press the panel against the case until it
snaps securely into place.
2.
Reconnect all cables and restart your computer.
Warning: Never turn on your computer unless all of its internal and external
parts are in place and it is closed. Operating the computer when it is open or
missing parts can damage your computer or cause injury.