Brewer Element Treatment 2230/2240 - Manual (Page 9)

Document 101294 RevA Printed in USA © 2010 9
MODELS 2230 and 2240 STEP 6
Screw G
Nut H
STEP A: Align holes in Hinge with holes in frame. Hinge must be oriented as shown with Hinge mounting
flange facing the Head End of the table.
STEP B: Install 4 Screws G (1/4”-20 x 1/2”) into the Hinge and through the frame. Fasten with
4 Nuts H (1/4”-20) and tighten.
Head End
Detail of Hinge
Assembly