Brewer Element Treatment 2230/2240 - Manual (Page 5)

Document 101294 RevA Printed in USA © 2010 5
MODEL 2230 and 2240 STEP 2
Foot End
Screw B
Screw B
Screw B
Screw B
Screw B
STEP A: With table in the upright position install Shelf Support using 4 Screws B (1/4”-20 x 2”). Do not
tighten at this time.
STEP B: Locate Drawer Supports according to above drawing so that the holes through the tube are
facing up, and the holes nearest the ends of the tubes are at the Foot End of the table. Install using 4
Screws B (1/4”-20 x 2”). Do not tighten at this time.
Tab
toward Foot End
Shelf Support
Drawer Supports
with holes upward and
toward Foot End
Drawer Supports
with holes upward and