Brewer Element Treatment 2230/2240 - Manual (Page 2)

Document 101294 RevA Printed in USA © 2010 2
Rubber Mallet
9/16” Open End Wrench
Phillips Screw Driver
7/16“ , 11/32” Socket or Wrench
MODELS 2230 & 2240
For the above models you will receive
three separate cartons: a frame & shelf
carton, an upholstery carton, and a
drawer carton. Inspect all three
carefully for shipping incurred damage.
COMPONENT IDENTIFICATION
Perform the following sequence in order when setting up
the table:
- Unpacking
- Assembly
- Leveling the Table
- Installing the Paper Roll
NOTE: Inspect all boxes and contents for damage.
Report any damage to the carrier immediately.
CAUTION
To avoid damaging the table’s upholstery or
painted surfaces, DO NOT use a knife or any other
sharp object to open the packaging.
OVERVIEW
NOTE: Save all packaging in case re-shipment is re-
quired.
WARNING
Two or more people should assist in moving the table.
Use proper lifting techniques when lifting. Failure to
do so could result in serious injury!
MODELS 2230 and 2240 TOOLS NEEDED