Brewer Element Treatment 2230/2240 User Manual

Page 12

Document 101294 RevA

MODELS 2230 and 2240 STEP 9

Screw A

Screw B

Foot End

Rounded

Corner

Back Section

Backrest Bracket

STEP A: Rotate Back Section until Backrest Bracket is engaged or top is horizontal on frame.

STEP B: Set upholstery bottom on frame, with Rounded Corners placed at the Foot End of the table.

STEP C: Install Screw A (1/4”-20 x 4”) through frame and into upholstery.

STEP D: Install 2 Screws B (1/4”-20 x 2”) through frame and into upholstery.

STEP E: Tighten Screws.