beautypg.com

Chapter 3 – Asus GRYPHON Z87 User Manual

Page 113

background image

ASUS GRYPHON Z87

3-45

Chapter 3

Option ROM Messages [Force BIOS]

[Force BIOS]

The third-party ROM messages will be displayed during the boot sequence.

[Keep Current] The third-party ROM messages will be displayed only if the third-party

manufacturer had set the add-on device to do so.

Interrupt 19 Capture [Disabled]

Allows you to trap Interrupt 19 by the option ROMs.
Configuration options: [Disabled] [Enabled]

Setup Mode [EZ Mode]

[Advanced Mode] Allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]

Allows you to go to EZ Mode of the BIOS after POST.

CSM (Compatibility Support Module)

Allows you to configure the CSM (Compatibility Support Module) items to fully support the

various VGA, bootable devices and add-on devices for better compatibility.

Launch CSM [Enabled]
[Auto]

The system automatically detects the bootable devices and the add-

on devices.

[Enabled]

For better compatibility, enable the CSM to fully support the non-UEFI

driver add-on devices or the Windows

®

UEFI mode.

[Disabled]

Disable the CSM to fully support the non-UEFI driver add-on devices

or the Windows

®

UEFI mode.

The following items appear only when you set the Launch CSM to [Enabled].

Boot Devices Control [UEFI and Legacy OpROM]

Allows you to select the type of devices that you want to boot.
Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only]

[UEFI only]
Boot from Network Devices [Legacy OpROM first]

Allows you to select the type of network devices that you want to launch.
Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from Storage Devices [Legacy OpROM first]

Allows you to select the type of storage devices that you want to launch.
Configuration options: [Both, Legacy OpROM first] [Both, UEFI first]

[Legacy OpROM first] [UEFI driver first] [Ignore]
Boot from PCIe/PCI Expansion Devices [Legacy OpROM first]

Allows you to select the type of PCIe/PCI expansion devices that you want

to launch.
Configuration options: [Legacy OpROM first] [UEFI driver first]