GE 45604 GE Z-Wave Outdoor Module - Manual (Page 9)

Please Note: After a power failure, the 45604 module returns
to its last used ON/OFF state.
ADVANCED OPERATION
The following Advanced Operation parameters require that
you have an advanced controller like the 45601 Advanced
remote. Advanced remotes from other manufacturers may
also be able to change these settings; however, basic remotes
do not have this capability
All On/All Off
Depending upon your primary controller, the 45604 outdoor
module can be set to respond to ALL ON and ALL OFF
commands in up to four different ways. Some controllers
may not be able to change the response from its default
setting. Please refer to your controller’s instructions for
information on whether or not it supports the configuration
function and if so, how to change this setting.
The four possible responses are:
- It will respond to ALL ON and the ALL OFF command (default).
- It will not respond to ALL ON or ALL OFF commands.
- It will respond to the ALL OFF command but will not respond to the
ALL ON command.
- It will respond to the ALL ON command but will not respond to the
ALL OFF command.