GE 45604 GE Z-Wave Outdoor Module - Manual (Page 7)

Please Note: Z-Wave home control networks are designed to work
properly alongside 802.11 wireless computer networks, Bluetooth
and other 2.4GHz or 5.8GHz devices. Some baby cams, wireless video
devices and older cordless phones using the 900MHz frequency range
may cause interference and limit Z-Wave functionality. Many 900MHz
products have a switch to select channel “A” or “B”. You may find that
one of these channels will cause less interference than the other.
Installation
This unit is suitable for outdoor use in damp
locations. Do not expose to rain or immerse
in water. Install at least 3 feet above ground
level with the receptacle pointed down.
When used outdoors you should plug the
unit into a GFCI receptacle with a receptacle
cover rated for outdoor use.
A mounting tab with screw key-hole is
located at the top of the unit. Install the
included screw in the disired location, leaving approximately 3/16”
of the screw exposed. Align the mounting tab with the screw
head, slide the tab over the screw and let the unit drop down to
lock it in place.
Key Features
- One Z-wave remote controlled AC outlet
- Remote
ON/OFF control via the Z-Wave controller
- Manual ON/OFF control with the pushbutton
Mounting
Bracket