GE 45144 GE Choice Alert Key-chain Remote - Manual (Page 6)

6 7
3. Press and hold the Disarm button on the Keychain
Remote. The Control Center will sound a long beep and
the LED will stop flashing. This confirms the Keychain
Remote has been assigned to the selected device
number. Release the Disarm button.
Operating the Keychain Remote
Away - Press and hold the ‘Away’ button on the
Keychain Remote to arm the system in the Arm Away
mode. The Armed LED light will begin flashing and
the Control Center will begin beeping. Release the
“Away” button.
Home - Press and hold the ‘Home’ button on the
Keychain Remote to arm the system in the Arm Home
mode. The armed LED will light on the Control Center.
Release the “Home” button.
Disarm* - Press and hold the ‘Disarm’ button on the
Keychain Remote to disarm the system instantly, or
stop the siren if sounding. The Arm LED will turn off on
the Control Center. Release the “Disarm” button.
Panic* - Pressing the ‘Panic’ button will cause the
siren to sound instantly. Press the Disarm button
to stop the siren. When the siren stops, release the
“Disarm” button.
Panic Disarm
Home Away Sets Control Center
into Arm Home
mode (intantly Alarm)
Sets off the
Alarm instantly Turns off the Alarm if sounding,
or disarms the Control Center
Activation LED
Sets Control Center into Arm
Away Mode (Delayed Alarm)