GE ZV54ISHSS - Manual (Page 5)

49-80209-5
5
Design Information
DUCT COVER ACCESSORIES
=9,
* 9” for ceiling heights 7’11” to 8’5” using the
supplied support frame and duct cover.
2UGHU=;'& for ceiling heights of 8”6” to 10’4”.
=9,
* 5” for ceiling heights 7’11” to 8’5” using the
supplied support frame and duct cover.
2UGHU=;'& for ceiling heights of 8”6” to 10’4”.
These accessories include telescoping support
frames and decorative covers. Order the accessory
for your model at the same time as the vent hood
and have on site before installation begins.
PRODUCT CLEARANCES
These vent hoods must be installed 30” min. to 36”
max. above the cooking surface. Exact installation
height is determined by ceiling height. The cooking
surface should be at least 36” above the floor.
IMPORTANT: Clearances may vary due to type of
cooking product and local codes. Check with local
inspectors to be sure standard is applicable.
• When installing these Island Hoods above a
Monogram Professional Range or Cooktop,
installation clearance must be at least 30”.
20" For ZV42 I
24" For ZV54 I
*Height
to Ceiling
30" Min.
36" Max.
36" Min.