American Audio DCD PRO 250 - Manual (Page 12)

1) The player has completed the cue or pause operation and is waiting for the play start command.
2) When the PLAY/PAUSE button is pressed, playback starts and the cue point is stored in the
memory.
3) Playing
4) The pause mode is set when the PLAY/PAUSE button is pressed again.
5) Pausing
6) Playback resumes when the PLAY/PAUSE button is pressed again. The new cue point is stored
in the memory.
7) Playing
Figure 12
American DJ
®
AUDIO • DCD-PRO250™ INSTRUCTIONS MANUAL • PAGE 12
BASIC OPERATION (CONT.)
Figure 13
7. Auto Cuing
• ”Cueing” is the action of preparing for playback
• Press CUE button, the player will enter cue mode. The playback returns to the cue point and enter
pause condition, the cue and pause indicator light up. When PLAY/PAUSE button is pressed, play
starts from the cue point.
• When the track search operation is completed after pressing either the FORWARD SEARCH or
BACKWARD SEARCH, the player automatically
finds the position at which the sound starts and cues there (Auto Cue).
• If the CUE button is pressed after the search operation or the scanning operation, the playback returns
to the cue point and enters pause condition.
• Figure 13 shows the relationship between the play and back cue operations.
8. SETTING A CUE POINT:
• A cue point is a starting point for a song. You may set a cue point anywhere in a CD or song.
• There are two (2) ways to set a CUE point:
1) You may press the IN/LOOP BUTTON on the fly (when the CD is playing). This will set a CUE Point
without interruption of music. Pressing the CUE BUTTON will now return you to the point in the
song at which you pressed the IN/LOOP BUTTON.
2) You may also use the JOG SHUTTLE to set a cue point. While the CD is in PAUSE mode, use the
JOG WHEEL forward or reverse to find your desired starting point. Once you have found your desired
position hit the PLAY BUTTON to set your cue point.
• Figure 13 shows the relationship between the cue, pause, and play.