American Audio DCD PRO 250 - Manual (Page 11)

American DJ
®
AUDIO • DCD-PRO250™ INSTRUCTIONS MANUAL • PAGE 11
CAUTION:
• Do not place any foreign objects in the disc tray, and do not place more than one disc in the disc tray
at a time. Doing so may result in malfunction.
• Do not push the disc tray in manually when the power is off, as this may result in malfunction and
damage the player.
3. Selecting Tracks
• Press the SKIP Buttons once to move to one higher or lower track.
• Hold the SKIP buttons in to change tracks continuously at a higher speed.
• When a new track is selected during playback, playback begins as soon as the search operation
is completed.
• If the FORWARD SKIP (17) button is pressed while on the last track, the fist track is selected. In the
same fashion, if the BACKWARD SKIP (16) button is pressed while at the first track, the last track
is selected.
BASIC OPERATION (CONT.)
PLAY
Fig. 11
5. Stopping Playback
• There are two ways to stop playback.
1) Press the PLAY button during playback to pause at that point. (figure 10)
2) Press the CUE button during playback to return to the position at which playback started (Figure 11).
6. Pausing
• Press the PLAY button to switch between play and pause.
• The PAUSE indicator lights when the pause mode is set.
• Figure 12 shows the relationship between the play and pause.
Fig. 10
4. Starting Playback
• Press the PLAY button during the pause or cue to start playback.
• The point at which playback starts is automatically stored in the memory as the cue point. The
pickup then returns to the cue point (the point at which playback started) when the CUE button is
pressed (Figure 10).
CUE
BOP BOP