GE JV566HSS - Manual (Page 10)

10
REMOVE EXHAUST ADAPTOR
5HPRYHWKH”URXQGH[KDXVWDGDSWRUIURPWKHWRSRI
the hood. Set it aside along with its mounting screws.
NOTE: Save the screws for 3-1/4”[” rectangular
ducted installation, if that is your chosen venting option.
” round
H[KDXVW
adaptor
REMOVE FILTERS
Remove the protective shipping film from the edges
of the metal grease filters. Press the filter locks back
and lift the filters out. Set them aside.
REMOVE WIRING COVER
FROM THE JUNCTION BOX
Remove the wiring cover from inside the hood.
Set the cover and its mounting screw aside.
Wiring
cover
REMOVE WIRING KNOCKOUT
Remove either the top or the back wiring knockout as
needed and install an approved strain relief clamp.
Strain relief
clamp
2
3
4
5
Filters
Installation Instructions