GE JRP28SKSS - Manual (Page 5)

Using the oven controls.
GEAppliances.com
/RZHU2YHQ&RQWURORQVRPHPRGHOV
29(17(03.QRE
Turn this knob to the
temperature setting you
want.
The 29(1&<&/(
light glows until the oven reaches your selected temperature,
WKHQJRHVRIIDQGRQZLWKWKHRYHQHOHPHQWVGXULQJFRRNLQJ
5
Throughout this manual, features and appearance may vary from your model.
Upper Oven Control, Clock and Timer Features and Settings
BAKE Pad
Touch this pad to select the bake function.
%$.(/LJKW
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHRYHQ
temperature at this point. Glows when the oven is in
bake mode.
%52,/+,/23DG
Touch this pad to select the broil function.
%52,//LJKW
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQVZLWFKIURPHI to
LO BROIL at this point. Glows when the oven is in broil
mode.
Display
Shows the operations you have selected, the time of
day and the cooking status.
COOKING TIME Pad
Touch this pad and then touch the + or – pad to set the
amount of time you want your food to cook. The oven
will shut off when the cooking time has run out.
'(/$<67$573DG
Use along with the COOKING TIME or SELF CLEAN pad
to set the oven to start and stop automatically at a
time you set.
29(1/,*+7212))3DG
Touch this pad to turn the oven light on or off.
7,0(5&/2&.3DG
Touch this pad to select the timer feature. Then touch +
and – pads to adjust time.
To set the clock, touch this pad twice and hold 3
seconds and then touch the + and – pads. The time of
day will flash in the display when the oven is first turned
on.
START Pad
Must be touched to start any cooking function.
– Pad
Short taps to this pad will decrease the time
or temperature by small amounts. Touch
and hold the pad to decrease the time or temperature
by larger amounts.
+ Pad
Short taps to this pad will increase the time
or temperature by small amounts. Touch
and hold the pad to increase the time or temperature
by larger amounts.
&/($52))3DG
Touch this pad to cancel ALL oven operations except
the clock and timer.
6(/)&/($13DGRQVRPHPRGHOV
Touch this pad to select the self-cleaning function. See
the Using the self-cleaning oven section.
&/($1/LJKW
)ODVKHVZKLOHLQHGLWPRGH³\RXFDQFKDQJHWKHOHQJWK
of time for the self-clean cycle at this point. Glows when
the oven is in the self-clean cycle. After the self-clean
cycle, the light will turn off. Unlatch the door.
If “F– and a number or letter” flash in the display and the oven
control signals, this indicates a function error code.
7RXFKWKH&/($52))SDG$OORZWKHRYHQWRFRROIRURQHKRXU
Put the oven back into operation.
If function error code repeats, disconnect power to the oven
and call for service.