GE JRP28SKSS - Manual (Page 11)

GEAppliances.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFF pad is touched. This
continuous 6 second beep may be canceled.
To cancel the 6 second beep:
Touch the BAKE and BROIL HI/LO pads at
the same time for 3 seconds until the
display shows SF.
Touch the BROIL HI/LO pad. The display
shows CON BEEP (continuous beep).
Touch the BROIL HI/LO pad again. The
display shows BEEP. (This cancels the one
beep every 6 seconds.)
Touch the START pad.
NOTE: This feature is not available for the lower
oven.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour military
time clock or black-out the clock display, follow
the steps below.
Touch the BAKE and BROIL HI/LO pads at
the same time for 3 seconds until the
display shows SF.
Touch the TIMER/CLOCK pad once. The
display will show 12 hr. If this is the choice
you want touch the START pad.
Touch the TIMER/CLOCK pad again to
change to the 24 hour military time clock.
The display will show 24 hr. If this is the
choice you want touch the START pad.
Touch the TIMER/CLOCK pad again to
black-out the clock display. The display will
show OFF. If this is the choice you want
touch the START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
Cook and Hold
Your new control has a cook and hold feature
that keeps cooked foods warm for up to 3 hours
after Timed Baking or Roasting is finished.
NOTE: This feature can only be programmed to
ZRUNZLWK7LPHG%DNLQJRU5RDVWLQJ6HHWKH
Using the timed baking and roasting features
VHFWLRQ$IWHU7LPHG%DNLQJRU5RDVWLQJKDV
automatically stopped, the programmed Cook
DQG+ROGZLOODXWRPDWLFDOO\VWDUW
To activate this feature for use after Timed
Baking or Roasting, follow the steps below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until the
display shows SF.
Touch the COOKING TIME pad. The
display will show Hld OFF.
Touch the COOKING TIME pad again to
activate the feature. The display will show
Hld ON.
Touch the START pad to activate the cook
and hold feature and leave the control set
in this special features mode.
NOTE: This feature is not available for the lower
oven.
Changing the Speed of the + or – Pads
As you use the + or – pad when setting a time
or temperature, you may notice the display
changes slowly. This special feature allows
you to change the speed. To set the speed you
prefer, follow the steps below.
Touch the BAKE and BROIL HI/LO pads
at the same time for 3 seconds until the
display shows SF.
Touch the + pad. The display will show
you a set speed between 1 and 5.
Touch the + pad to increase the speed up
to the number 5.
Touch the – pad to decrease the speed
down to the number 1.
Touch START to activate the setting and
leave the control set in this special
features mode.
11