Airlink PinPoint EDGE/GPRS - Manual (Page 76)

PinPoint EDGE/GPRS - User Guide, version 2.32 70
AT Commands: Information and Status
*POWERMODE?
&V
+CCID
+CIMI
+HWTEMP?
+ICCID
• Network Dormant
The PinPoint is connected to the EDGE/GPRS network, but the link is dormant. It will be woken up
when data is sent or received.
• No Service
There is no EDGE/GPRS network detected.
• Hardware Reset
The hardware module is being reset. This is a temporary state.
Displays the current power state/mode. Possible values returned are:
• Initial
The modem is in the initial 5 minutes since power up, so power down event will be
ignored.
• On
Regular power on, a power down is not pending.
• Low Cancellable
Power down is pending but still cancelable if the power down trigger goes away.
• Low Pending 1 and 2
Power down is pending, any modem tasks are gracefully preparing for the power down.
• Low Final
Power down is imminent.
• Low
Power is down.
View active profile (the contents of the active registers).
Not displayed with Wireless Ace.
Subscriber Identity Module ID
International Mobile Subscriber Identity
Displays the internal temperature of the radio module in degrees Centigrade.
Subscriber Identity Module ID