Chapter 2 activation of the pinpoint, Opening the case, Ejecting the sim tray – Airlink PinPoint EDGE/GPRS User Manual
Page 10: Activation of the pinpoint, Opening the case ejecting the sim tray
PinPoint EDGE/GPRS - User Guide, version 2.32
4
CHAPTER 2
Activation of the PinPoint
To install the SIM, you will only need a small phillips head screw driver.
a. Unplug the PinPoint’s power and all cables.
b. Using a small phillips head screw driver, remove the screws on the back of the PinPoint.
c. Slide the casing off of the PinPoint and set it aside.
1.
Opening the Case
FIGURE 1.
PinPoint back
2.
Ejecting the SIM tray
a. Using the tip of a PDA stylus, an unbent paperclip, or other slim blunt item press the yellow
button of the SIM tray. On the PinPoint, the button is between two boards.