HP LaserJet Pro 200 color Printer M251nw - Manual (Page 94)

Restore the factory-set defaults
Restoring the factory-set defaults returns all of the product and network settings to the factory defaults. It
will not reset the page count, tray size, or language. To restore the product to the factory-default
settings, follow these steps.
CAUTION: Restoring the factory-set defaults returns all of the settings to the factory defaults, and it
also deletes any pages that are stored in the memory. The procedure then automatically restarts the
product.
Restore the factory-set defaults (LCD control panel)
NOTE: This section applies to the HP LaserJet Pro 200 color M251n Printer model only.
1. At the control panel, press the OK button to open the menus.
2. Open the following menus:
● Service
● Restore Defaults
The product automatically restarts.
Restore the factory-set defaults (touchscreen control panel)
NOTE: This section applies to the HP LaserJet Pro 200 color M251nw Printer model only.
1. From the Home screen on the product control panel, touch the Setup button.
2. Scroll to and touch the Service menu.
3. Scroll to and touch the Restore Defaults button, and then touch the OK button.
The product automatically restarts.
82 Chapter 5 Solve problems ENWW