HP Deskjet 5440 Photo Printer User Manual
Page 25
Check the documentation that came with your camera to ensure that your camera
supports PictBridge.
Follow these steps to print photos from a PictBridge-compatible camera:
1.
Load photo paper into the printer.
For instructions about loading photo paper, click one of the following options:
–
–
2.
Connect your camera to the PictBridge port on the front of the printer using the
USB cable supplied with your camera.
3.
Turn on your camera, and then set it to PictBridge mode.
If you do not know how to set the camera to PictBridge mode, see the
documentation that came with the camera.
Note
When the camera is connected correctly, the Connection light is
illuminated. The Connection light blinks green when printing from the
camera. If the camera is not PictBridge-compatible or is not in PictBridge
mode, the Error light flashes.
1 Connection light
2 Error light
After you successfully connect the camera to the printer, you can print your photos.
Be sure the size of the paper loaded in the printer matches the setting on your
camera. Refer to the documentation that came with your camera for detailed
information on printing from the camera.
User's guide
23